New treatment route for closed-die forgings of steels with 2.5% manganese
Bublíková Dagmar - ZČU v Plzni (Czech Republic)
November 25 – 26, 2026
Congress Centre Tři Věžičky
2017List of Papers
Graphite materials for high-temperature applications
Bujna - KOMPOZITUM s.r.o. (Slovak Republic)
Advanced solutions for material analysis in powder metallurgy
Černický David - Metalco Testing s.r.o. (Czech Republic)
Microstructural evaluation of tool steel Vanadis 6 after sub-zero treatment at -140°C without tempering – POSTER
Ďurica Juraj - Slovak University of Technology in Trnava (Slovak Republi
Customer-specific, flexible induction hardening machine for hardening workshop
Fisher Lukas - ITG Induktionsanlagen GmbH (Germany)
Effect of microstructure on the steel A694 F60 toughness values KV-46
Foret Rudolf - VUT FSI v Brně (Czech Republic)
Thermal treatment of 3D-printed titanium alloy
Fousová Michaela - VŠCHT Praha (Czech Republic)
Advanced metallography techniques of sample preparation: Microstructure analysis of phase transformation after thermal treatment in commercially pure Ti
Gärtnerová Viera - Struers GmbH (Czech Republic)
Investigation of electron beam surface remelting of plasma nitrided spray-formed hypereutectic Al-Si alloy
Hegelmann Eugen - TU Bergakademie Freiberg (Germany)
Development of the Tube Quenching Unit in Třinecké železárny a.s.
Hnízdil Milan - VUT FSI Brno (Czech Republic)
Influence of beam guidance technique and process parameters during electron beam remelting of cast iron on ledeburite morphology and the subsequent formation of nitride layers
Holst Anja - TU Bergakademie Freiberg ( Germany)
Application of deep cryogenic treatment in the nitriding process
Hradil David - COMTES FHT a.s. (Czech Republic)
Effect of the heat treatment on the bioactivity of nanostructured surfaces
Hybášek Vojtěch - VŠCHT Praha (Czech Republic)
Adjustment of the heat treatment of 1.4313 steel for the improvement of mechanical treatment of dynamically loaded parts – POSTER
Ječminková Šárka - Howden ČKD Compressors, University of Chemical Technology in Prague (Czech Republic)
Metallographic observation for evaluating microstructural evolution on various cross-sections of forged part upon air-cooling from finishing temperature – POSTER
Jeníček Štěpán - University of West Bohemia (Czech Republic)
Use of the Press Hardening Technology for Treatment of TRIP Steel
Jirková Hana - University of West Bohemia (Czech Republic)
Factors influencing hardness-testing measurements: In total 44 factors separated to groups, explanation how avoid their influence
Josífek Martin - Struers GmbH (Czech Republic)
Simultaneous Enhancement of Wear Performance and Toughness of Tool Steel by Subzero Treatment – Real Opportunity or Fiction
Jurči Peter - STU Trnava (Slovak Republic)
LAM PLAN technology for preparation of metallographic samples
Keller Libor - TSI System s.r.o. (Czech Republic)
Preparation of TiAl15Si15 alloy by high pressure spark plasma sintering (HP SPS) – POSTER
Knaislová Anna - University of Chemical Technology in Prague (Czech Republic)
High-temperature oxidation of intermetallics based on Ti-Al-Si system
Knaislová Anna - VŠCHT Praha (Czech Republic)
Increase tool service life for wood cutting by cryogenic treatment
Kolář Zdeněk - Pilana Tools (Czech Republic)
Cleaning as an essential step prior heat treatment
Konvalinka Roman - SurTec ČR, s.r.o.
Properties of cemented carbides upon deep freezing
Kříž Antonín - ZČU v Plzni (Czech Republic)
Heat treatment of the TRIP steel with partial substitution of silicon by aluminium
Kučerová Ludmila - ZČU v Plzni (Czech Republic)
LECO AMH55 Hardness Testing Systems – COMPANY PRESENTATION
Kuna Jan - LECO Instrumente Plzeň, spol. s r.o. (Czech Republic)
Influence of heat treatment parameters onto tempering curve for selected cold working tool steel – POSTER
Kuřík M. - Czech Technical University in Prague (Czech Republic)
What do not speak CQI-9
Landa Milan - Ing. Milan Landa (Czech Republic)
How different steel grades react to a low pressure nitriding process: influence of alloying elements
Lebigot Philippe - Fours Industriels BMI (France)
Properties of electron beam hardened layers made by different beam deflection
Matlák Jiří - VUT Brno (Czech Republic)
Mathematical modeling of the effect of main boroaluminizing factors on the diffusion layer thickness of low-carbon steel
Mishigdorzhiyn Undrakh - East Siberia State University of Technology and Management (Russian Federatioin)
High-temperature behaviour of new Fe-Al-Si alloy produced by powder metallurgy
Novák Pavel - VŠCHT Praha (Czech Republic)
Experimental modelling of materials properties and microstructure of new UHS steels usable for press-hardening – POSTER
Opatová Kateřina - University of West Bohemia (Czech Republic)
The heat treatment of steels in the light of the principle sufficient hardenability
Pacyna Jerzy - AGH Universtiy of Science and Technology (Poland)
Heat treatment fixtures, alloys and design
Pálka Stanislav - Cronite CZ (Czech Republic)
Low Pressure Carburizing and High Pressure Gas Quenching of Chromium-Alloyed PM Parts
Pouloux Patrick - ECM Technologies (France)
Equipment and technologies for vacuum heat treatment
Przygoński Marcin - SECO/WARWICK S.A. (Poland)
Microstructure and tempering response of Vanadis 6 steel after sub-zero treatment at -140 °C – POSTER
Ptačinová Jana - Slovak University of Technology in Trnava (Slovak Republic)
Requirements for quality management systems update technical specifications IATF 16949:2016
Rašková Stanislava - Czech Republic
The causes which may affect life of casting moulds – WN 1.2343
Rašková Stanislava - Czech Republic
Solutions for implementing “Industry 4.0” for modern heat treatment plants
Ritter Karl - ALD Vacuum Technologies GmbH (Germany)
Effects of Q&P process parameters on properties of 42SiCr steel – POSTER
Rubešová Kateřina - ZČU v Plzni (Czech Republic)
Properties of Ni-Ti-(Fe,Co,Al) shape memory alloys prepared by self-propagating high-temperature synthesis – POSTER
Salvetr Pavel - University of Chemical Technology in Prague (Czech Republic)
Microstructure and thermal stability of Al-Fe-X alloys – POSTER
Školáková Andrea - University of Chemical Technology in Prague (Czech Republic)
Controlled aging profiles age hardening – working diagnostics
Skrbek Břetislav - TU Liberec (Czech Republic)
Flow modeling of the quenching medium
Stolař Pavel - ECOSOND s.r.o. (Czech Republic)
Prediction of internal stresses in heat treatment processes
Šuchmann Pavel - COMTES FHT a.s. (Czech Republic)
Liquid quenchants, properties and range of application, new research and development in the field of liquid quenchants
Süss Rainer - Burgdorf GmbH (Germany)
Influence of the heat treatment to mulcher tool durability in operation
Ťavodová Miroslava - Technická univerzita Zvolen (Slovak Republic)
Vacuum heat treatment of quality steels CPM 10V A CPM 10V AQ
Tesárková Klára - Bodycote HT, s.r.o. (Czech Republic
Gas nitriding process control with variable nitriding potential for up to 50% NH3 saving
Theisen Frank - STANGE Elektronik GmbH (Germany)
Cost- and Resource Effective Surface Layer Heat Treatment in Gear, Tool, Aeronautic, Oilfield and Automotive Industry by PulsPlasma®Nitriding
Voigtländer Dietmar - PVA Industrial Vacuum Systems GmbH (Germany)
Parts cleaning before and after heat treatment of metals
Vráblík Filip - Ecosond s.r.o. (Czech Republic), Burgdorf GmbH (Germany)
New Sealed Quench Furnace Innova 4.0 – First Experiences from Practice
Wethmar Richard - IVA Schmetz GmbH (Germany)
The investigations of quenching process for improving the flatness of the hot rolled steel plate
Yu-Cheng Liou - National Cheng Kung University (Taiwan)
Technical and metallurgical criteria for installation of isothermal annealing station for car gearbox forgings
Zimmermann D. - Bosio (Germany)
ECOSOND
Poster Award
The best posters will be awarded and announced during the conference and in the reports. We value posters equally as oral presentations. They give you the chance to present your results, graphs and pictures in a non-transient form and discuss them with the participants during the dedicated poster session or any other time.
The award is endowed by company ECOSOND s.r.o. with the sum of 300 €.