List of Papers

Simplifying thermal conductivity testing for the enhanced materials – COMMERCIAL

Bačík Martin - SPECION, s.r.o. (Czech Republic)

Tool steels processed by DED technology used for the repair of pressure casting moulds

Borkovcová Klára - University of Chemical Technology in Prague (Czech Republic)

Advanced developments in the field of liquid quenchants

Braun Rainer - BURGDORF GmbH & Co. KG (Germany)

Optimalization cooling temperature during heat treatment of closed die-forgings with amount of manganese and sillicon – POSTER

Bublíková Dagmar - ZČU Ostrava (Czech Republic)

Discussion on energy saving and emission reduction technology of heat treatment equipment

Buchner Klaus - Aichelin Holding GmbH (Austria)

Electron beam cladding using Inconel 718 wire and subsequent boriding – a new duplex surface treatment for highly loaded components

Buchwalder Anja - TU Bergakademie Freiberg (Germany)

Metallography of 3D printed components

Černický David - Metalco Testing s.r.o. (Czech Republic)

Hot work tool steels – Austenitizing process according to various standards of NADCA, GM, FORD itp.

Chwiałkowski Łukasz - SECO/WARWICK S.A. (¨Poland)

Automatization in metallographic sample preparation – COMMERCIAL

Čvanda Petr - Metalco Testing s.r.o. (Czech Republic)

Low density steels: phase structures

Hájek Jiří - COMTES FHT a.s. (Czech Republic)

Direct part marking for high-temperature applications – POSTER

Hájek Jiří - COMTES FHT a.s. (Czech Republic)

Evaluation of the usability of Electron Beam for the modification of surface layers deposited by the Cold Spray technology

Havlík Petr - Brno University of Technology (Czech Republic)

Use of additive manufacturing (3D printing) for induction hardening tools

Hrůzek Lukáš, Štefek Petr - PRECIZ, s.r.o., Safina, a.s. (Czech Republic)

CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants

John Matthias - ALD Vacuum Technologies GmbH (Germany)

Variations in corrosion resistance of differently cryogenically treated tool steel

Jurči Peter - Slovak Technik University of Trnava (Slovak Republik)

Non-contact temperature measurement at heat treatment

Keller Libor - TSI System s.r.o. (Czech Republic)

Effect of temperature change on the properties of the cemented layer – POSTER

Klimeš Martin - Univerzita obrany (Czech Republic)

Design of cooling sections for heat treatment based

Kotrbáček Petr - VUT v Brně (Czech Republic)

Recovery of degraded steel 15 128 (according to ČSN) using heat treatment

Kříž Antonín - University of West Bohemia in Pilsen (Czech Republic)

The application of a gas nitriding to increase the durability of forging tools

Malinowski Jędrzej - SECO/WARWICK S.A. (Poland)

Use of low-energy waste heat in heat treatment of metals

Masčuch Jakub - ČVUT Praha (Czech Republic)

Quality monitoring during laser hardening

Mužík Tomáš - MATEX PM, s.r.o. (Czech Republic)

3D printing of functional layer from NIMONIC 80A on forming tools – POSTER

Nacházelová Daniela - COMTES FHT a.s. (Czech Republic)

Additively manufactured parts from AISI H13 tool steel and their heat treatment

Němeček Stanislav - University of West Bohemia in Pilsen (Czech Republic)

Structure and thermal stability of rapidly solidified alloys with elements from deep-sea nodules

Novák Pavel - University of Chemical Technology in Prague (Czech Republic)

Overview of measuring methods and tests in hardening plants

Procházka Luboš - ECOSOND s.r.o. (Czech Republic)

Energy efficiency in the heat treatment shops

Půlpytel Jan - V-S KOM, s.r.o. (Czech Republic)

Temperature control requirements for special processes

Rašková Stanislava - Ing.Rašková (Czech Republic)

Prevision® – for your heat treatment furnace

Schmiedeke Uwe - IVA Schmetz GmbH (Germany)

Comparison between Quenching &Tempering and Quenching & Partitioning

Schneider Reinhold - University of Applied Sciences Upper Austria (Austria)

Deep case low pressure carburizing

Schuhler Guillaume - Fours Industriels BMI (France)

The thickness of hardened layers of camshafts

Skrbek Břetislav - TU v Liberci (Czech Republic)

Nadca and 3D print

Stanislav Jiří - JST Consultancy (Czech Republic)

Opportunities and benefits of stabilized retained austenite by carbonitriding for highly loaded parts

Steinbacher Matthias - Leibniz-Institut für Werkstofforientierte Technologien - IWT (Germany)

Nondestructive white layer evaluation of the nitrocarburising parts

Tesárková Klára - Bodycote HT s.r.o. (Czech Republic)

Effect of processing on structure and properties of aluminium alloys with the elements from reduced deep-sea nodules – POSTER

Tsepeleva Alisa - University of Chemical Technology in Prague (Czech Republic)

Investigation of microstructural characteristics after heat treatment of maraging steel samples prepared by direct metal laser sintering

Vanžura Radoslav - Technická univerzita v Košiciach fakulta výrobných technológií so sídlom v Prešove (Slovak Republic)

Methods for material modelling in metal processing

Waldenmaier Thomas, Hermann Autenrieth - Robert Bosch GmbH (Germany)